It always feels good to come back to a house with a pleasant smell rather than entering one which smells like a pigsty. A room with a fresh fragrance gives the impression of a clean and healthy house. A stinking house not only affects the habitants but also deters visitors from coming back again. There are many ways in which we can achieve a clean and fresh smelling house, some are home made and some not but all of them have the same desired effect, a clean and nice smelling house. The first advice is to avoid smoking in the house. It is always beneficial to go out for a smoke and then come back rather than smoking in the house and making the non smokers a potential cancer risk and not to forget, it makes the house smell like an ash tray. Also, use room fresheners as they are available in various flavors and odors to refresh your mind after a hard day’s work.

Curtains are a very important part of your home décor. They enhance the beauty of your room. So if you do not want to see the color of your curtains change and dirt degrade them, regular cleaning has to be done.

Curtains can be manually cleaned using cold water and a little bit of detergent. You can also clean them using your washing machine. Dry the curtains under the sunlight or you can use a low setting for the type which can be washed without being damaged. If you remove the dust regularly, then you can wash the curtains seldom. The dirt and dust can be removed easily using a vacuum cleaner. A freshener can be sprayed to make them smell nice and give a sparkling look.

Replace the curtains with new one when they are discolored. If you want to stay away from disease causing germs and dust, clean your curtains on a regular basis.

Inadequate airflow under metal roof panels can result in leakages and other problems such as imbalanced heating and cooling of your home. The best way to counter balance any of the negatives a metal roof can cause is to create a proper insulation system that discourages condensation under the metal roof.

Polyurethane foam kits are the perfect solution for insulating interior or exterior parts of your home. They come in spray form and must be sprayed according to the user guide on the designated spots under roofing or a false ceiling whatever the case may be.

Measure your roof area accurately to get the correct number of polyurethane foam kits needed to complete the job. Wearing safety gears proceed to mix and prepare the spray as per the directions on the label.

Starting from the interior edge where the roof meets the wall spray the foam in systematic rows until you have covered the whole roof.

Mildew resistant paints do an excellent job of protecting home exteriors from becoming breeding grounds for fungus and mildew as a result of extreme climatic conditions. It has a unique formulation that prevents the formation of mildew on both interior and exterior walls. Mildew resistant paint is available in a vast number of colors to blend with your interiors or exterior décor elements.

To give your home longer lasting beauty, consider painting it with mildew resistant paint available at most hardware stores across the city. Start by cleaning the existing walls with a heavy duty hose and wipe or scrub off all the dirt, grime and fungus.

Use a ladder to reach higher levels. Wipe off with old rags to get a smooth mildew free surface. Apply the mildew resistant paint as you would any other ordinary paint in layers to the whole wall. Allow significant drying time between each coat.

Instructions

1. The Persian rugs should be vacuumed both horizontally and vertically to remove dirt from underneath the knots.

2. The rug should be flipped over and the fibers pushed back underneath the rug. The back should be vacuumed like you did the front of the rug. The rug should be beaten with a broom to remove dust.

3. About 2 tbsp. of baby shampoo and 1 gallon of tepid water should be mixed in a bucket. A soft bush should be dipped into the mixture and the rug should be gently scrubbed and rinsed with cool water.

4. The rug should be hanged back on the fence to dry. The rug should be vacuumed to fluff up the rug fibers.

5. A tear in the rug should be repaired by flipping it over and by pressing a piece of duct tape of the same color to match the background on the back.

Wallpaper paste helps for adhering decorative paper to a wall.

Instructions

1. Approx. 1 cup of rice flour should be poured into the top pan of a double boiler and 3 tsp. of alum should be added.

2. Around 2 cups of water should be added and stirred continuously with a wire whisk. The stirring should be continued till the mixture reaches the consistency of heavy cream. The mixture can be loosened with additional water if required.

3. The heat should be turned on under the pan and the mixture should be simmered. It should be cooked till it looks like gravy.

4. The paste should be removed from the stove and allowed to cool.

5. After cooling clove oil should be added to the mixture and it should be blended with the whisk.

6. The cooled mixture should be poured into a glass jar which has a tight-fitting lid.

Instructions

1. Identification of material your window frame is necessary for buying primer which can adhere to that material. Some plastics can’t be painted at all.

2. Any loose paint should be removed with a box knife and sandpaper.

3. A line of masking tape should be run along either side of the window frame sections you intend to paint. A drop cloth should be placed beneath the window.

4. Primer should be applied to all sections of the window frame using long, even strokes running in the same direction. For painting narrow sections of frame, your brush should be turned so it is parallel to the line of the frame being painted.

5. Any paint should be wiped off that gets on the glass, with a rag. Dried paint should be scraped off gently using the box knife.

6. The primer should be allowed to dry, and a coat of paint should be applied.

Ridgeway Clocks which is a division of the Howard Miller Clock Company has been producing traditional grandfather clocks which are also known as “long case” clocks since the year1960. Ridgeway has achieved the distinction as one of the oldest brand of grandfather clocks which are being manufactured continuously in the United States, referring to their official website. They add a welcome and attractive look to your home interior, and also Ridgeway grandfather clocks are very simple for setting. The entire clock-setting process requires only a few seconds for completion.

Instructions

1. The glass door of your Ridgeway grandfather clock should be unlocked and opened as to get access to its face and hands.

2. First, the minute hand of the clock should be grasped with care between your thumb and forefinger.

3. Only the minute hand should be rotated counterclockwise till both the hour and minute hands show the correct time.

Instructions

1. The bottom round section of a downspout adapter should be placed on a firm surface. The perforated center knockout located on the top of the adapter should be hammered with a hammer. The knockout should be pulled out from the adapter.

2. The perforated knockout opening should be glided over the bottom of the downspout.

3. One end of a corrugated pipe should be pushed into the round end of the downspout adapter.

4. The direction of a screw gun should be set with a 5/16-inch hex head adapter to forward. The hex head adapter should be glided over the head of the clamp worm screw. The screw gun trigger should be pressed to tighten the worm screw.

5. The corrugated pipe should be pulled down. The tightening of the pipe clamp should be continued till the corrugated pipe is fixed in position and can not be moved.

Instructions

1. The old paint on the R-panels should be scraped off with a hand scraper.

2. The R-panels should be cleaned to remove any dirt and all the paint chips. The entire area should be brushed using a broom and dust pan.

3. The roof should be washed with a hose pipe to clean out all extra grease which was not brushed off.

4. A rust-inhibiting primer coating should be applied using a roller. A coat of primer should be applied starting from one corner of the roof and working towards the other end.

5. A coat of acrylic latex paint should be applied after waiting a few hours to allow the primer to dry. The process should be continued till all of the R-panels have been painted. A second coat should be applied after three hours. The area should be inspected to ensure that everything is painted evenly.